Forwarded to: smtp@dacs dc 16@servers[triumphs@autox.team.net]
cc:
Comments by: Kenneth T. Hanson@DAS CLOSE@Chicago
-------------------------- [Original Message] -------------------------
Re: Removal of windscreen on TR-6:
The factory manual for the '65 TR-4 (which is basically the same body
as your TR-6). To wit:
To Remove:
Pull off the draught welting from the screen pillars.
Remove three bolts with cover plates(from top of
dash), remove bolt(s) from bottom of screen pillar(I
presume these are the bolts you have already removed.
NOW. slacken bolts that "crimp" this holder. They
are accessible when the door is opened.
Now, lift out the windscreen assembly.
Remove the rubber weathersrip from the back of the
windscreen assembly.
I hope this helps. I have accomplished this in the past. If you are
replacing the glass, then re-install the windscreen assembly first.
Installing new glass is really very easy with some "heavy" string.
Good luck!
Ken Hanson
Owned and drove TR 3's and 4's for 16 years. Looking for a TR-3 project car!
|