On Tue, 30 May 1995, dan parslow wrote:
> As Tessa comes back to life I find that I inadequately labeled
> all the wiring harness connections (rousing chorus of "you fool"
> and "been there, done that" from all I'm sure)
Acutally, just the opposite from me. I don't label things when I take
them apart, as it can cause unnecessary confusion later.
>
> There is a small bundle of black ground wires emerging from the
> harness right by the starter solenoid, crimped to one connector.
> I can't see what this attaches to.
They connect to a steel tab which is spotwelded to the firewall
near the solenoid. If your tab is missing and you've already painted the
firewall, you have a choice to make. Me, I'd go the stock route, but
others may recommend simply screwing them to the body. Whatever you like.
You may make a tab connector that could sit under the solenoid mounting
screws.
Have fun,
Greg
Greg Meboe meboe@wsunix.wsu.edu
Dept. of Mechanical and Materials Engineering
Washington State University, Pullman, Wa.
'85 XJ-12 H.E. (daily) '67 Spit-6 '74 TR-6
|