--===============0196842995031377054==
boundary="----=_Part_806707_111195856.1645132994638"
------=_Part_806707_111195856.1645132994638
Content-Transfer-Encoding: quoted-printable
Yup, it was assembled WRONG.
Yes, it appears to be assembled according to the photo that was posted from=
the
shop manual... which is wrong.
The circlip must retain the washer that is captive on the pushrod. Pushrod=
should NOT
fall out loose from the master cylinder assembly.
Hopefully you did not sustain any injury or damage to your Tiger.
Gary
> On 02/17/2022 1:35 PM Jay <jay.laifman@gmail.com> wrote:
>=20
>=20
> That totally matches what I would expect to see. That round disc sho=
uld have been on the inside of the clip. So either it was not assembled th=
at way, which is odd. Or perhaps the disk is a smaller OD than the ID of t=
he MC and the clip.
>=20
>=20
> > > On Feb 17, 2022, at 12:01 PM, Joel Martin via Tigers =
<tigers@autox.team.net mailto:tigers@autox.team.net > wrote:
> >=20
> >=20
> >=20
> >=20
> > On Thursday, February 17, 2022, 05:36:52 AM EST, Joel Martin <j=
martiniii@yahoo.com mailto:jmartiniii@yahoo.com > wrote:
> >=20
> >=20
> >=20
> >=20
> > Hello all.
> >=20
> > I pulled apart the brake actuator today and the whole thing jus=
t fell out of the rubber boot? Rubber boot was split. There is a circle c=
lip up next to the master cylinder plunger still in place.
> >=20
> > Here is a picture of my brake setup which does not match the pi=
cture below from the workshop manual.
> >=20
> > My question: How is the brake actuating rod retained in the ma=
ster cylinder so it will not come out?
> >=20
> > <My_Brake_plunger.jpg>
> >=20
> >=20
> > On Monday, February 14, 2022, 08:45:16 PM EST, <tigers-request@=
autox.team.net mailto:tigers-request@autox.team.net > wrote:
> >=20
> >=20
> > Send Tigers mailing list submissions to
> > tigers@autox.team.net mailto:tigers@autox.team.net
> >=20
> > To subscribe or unsubscribe via the World Wide Web, visit
> > http://autox.team.net/mailman/listinfo/tigers
> > or, via email, send a message with subject or body 'help' to
> > tigers-request@autox.team.net mailto:tigers-request@autox.t=
eam.net
> >=20
> > You can reach the person managing the list at
> > tigers-owner@autox.team.net mailto:tigers-owner@autox.team.=
net
> >=20
> > When replying, please edit your Subject line so it is more spec=
ific
> > than "Re: Contents of Tigers digest..."
> > Today's Topics:
> >=20
> > 1. Brake Pedal (Joel Martin)
> > 2. Re: Brake Pedal (Jay)
> > 3. Re: Brake Pedal (Will Seay)
> > 1966 Tiger MK 1A
> >=20
> >=20
> > Thanks
> > There are so many oddities here. First, at one end, the plunge=
r should have a disc at the end, with a circlip that holds it in. That ru=
bber boot would likely hold in the disc, even if the circlip broke. So sin=
ce it =E2=80=9Ccame out=E2=80=9D of the rubber, it sounds like the center o=
f the disc is some how flawed. But FWIW, I can=E2=80=99t imagine how that =
would happen unless something was quite odd in the assembly.
> >=20
> >=20
> >=20
> >=20
> > > > > On Feb 14, 2022, at 4:28 PM, Joel Martin =
via Tigers <tigers@autox.team.net mailto:tigers@autox.team.net > wrote:
> > >=20
> > > 1966 Tiger MK 1A
> > >=20
> > > I had a little scare the other day backing out of the DMV=
parking lot. No Brakes. Discovered that the brake plunger had come out o=
f the rubber sleeve going into the master cylinder.
> > >=20
> > > The only thing that could have happened is when I got out=
, my foot pulled the pedal back towards the interior and this pulled the pl=
unger out.
> > >=20
> > > It only had the spring, plunger and rubber plug to hold t=
he plunger into the master cylinder.
> > >=20
> > > Is there suppose to be something else to hold the plunger=
in place?
> > >=20
> > > Thanks
> > > _______________________________________________
> > >=20
> > > tigers@autox.team.net mailto:tigers@autox.team.net
> > >=20
> > > Donate: http://www.team.net/donate.html
> > > Archive: http://www.team.net/pipermail/tigers http://auto=
x.team.net/archive
> > >=20
> > > Unsubscribe: http://autox.team.net/mailman/options/tigers=
/jay.laifman@gmail.com
> > >=20
> > >=20
> > >=20
> > > > >=20
> > Joel,
> > Your master cylinder was apparently assembled without the circl=
ip. See #2 in the attached from the workshop manual.
> >=20
> > Will - 382001570
> > Tigers@embarqmail.com mailto:Tigers@embarqmail.com
> >=20
> >=20
> > On Mon, Feb 14, 2022 at 7:28 PM Joel Martin via Tigers <tigers@=
autox.team.net mailto:tigers@autox.team.net > wrote:
> >=20
> > > > > 1966 Tiger MK 1A
> > >=20
> > > I had a little scare the other day backing out of the DMV=
parking lot. No Brakes. Discovered that the brake plunger had come out o=
f the rubber sleeve going into the master cylinder.
> > >=20
> > > The only thing that could have happened is when I got out=
, my foot pulled the pedal back towards the interior and this pulled the pl=
unger out.
> > >=20
> > > It only had the spring, plunger and rubber plug to hold t=
he plunger into the master cylinder.
> > >=20
> > > Is there suppose to be something else to hold the plunger=
in place?
> > >=20
> > > Thanks
> > > _______________________________________________
> > >=20
> > > tigers@autox.team.net mailto:tigers@autox.team.net
> > >=20
> > > Donate: http://www.team.net/donate.html
> > > Archive: http://www.team.net/pipermail/tigers http://auto=
x.team.net/archive
> > >=20
> > > Unsubscribe: http://autox.team.net/mailman/options/tigers=
/tigers@embarqmail.com
> > >=20
> > >=20
> > >=20
> > > > > _______________________________________________
> > Tigers mailing list
> > Tigers@autox.team.net mailto:Tigers@autox.team.net
> > http://autox.team.net/mailman/listinfo/tigers
> >=20
> > Donate: http://www.team.net/donate.html
> > Archive: http://www.team.net/pipermail/tigers http://www.team.n=
et/pipermail/tigers http://autox.team.net/archive
> >=20
> >=20
> >=20
> > <My_Brake_plunger.jpg>_________________________________________=
______
> >=20
> > tigers@autox.team.net mailto:tigers@autox.team.net
> >=20
> > Donate: http://www.team.net/donate.html
> > Archive: http://www.team.net/pipermail/tigers http://autox.team=
.net/archive
> >=20
> > Unsubscribe: http://autox.team.net/mailman/options/tigers/jay.l=
aifman@gmail.com
> >=20
> >=20
> >=20
> > >=20
> _______________________________________________
>=20
> tigers@autox.team.net
>=20
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers http://autox.team.net/a=
rchive
>=20
> Unsubscribe: http://autox.team.net/mailman/options/tigers/garywinblad=
@comcast.net
>=20
>=20
>=20
------=_Part_806707_111195856.1645132994638
Content-Transfer-Encoding: quoted-printable
<!doctype html>
<html>
<head>=20
<meta charset=3D"UTF-8">=20
</head>
<body>
<div>
Yup, it was assembled WRONG.
<br>
</div>
<div class=3D"default-style">
Yes, it appears to be assembled according to the photo that was posted f=
rom the
<br>
</div>
<div class=3D"default-style">
shop manual... which is wrong.
<br>
</div>
<div class=3D"default-style">
<br>
</div>
<div class=3D"default-style">
The circlip must retain the washer that is captive on the pushrod. =
Pushrod should NOT
<br>
</div>
<div class=3D"default-style">
fall out loose from the master cylinder assembly.
<br>
</div>
<div class=3D"default-style">
<br>
</div>
<div class=3D"default-style">
Hopefully you did not sustain any injury or damage to your Tiger.
<br>
</div>
<div class=3D"default-style">
Gary
<br>
</div>
<div class=3D"default-style">
<br>
</div>
<div class=3D"default-style">
<br>
</div>
<blockquote type=3D"cite">
<div>
On 02/17/2022 1:35 PM Jay <jay.laifman@gmail.com> wrote:
</div>
<div>
<br>
</div>
<div>
<br>
</div>That totally matches what I would expect to see. That round =
disc should have been on the inside of the clip. So either it was not=
assembled that way, which is odd. Or perhaps the disk is a smaller O=
D than the ID of the MC and the clip.
<br class=3D"">
<div>
<br class=3D"">
<blockquote type=3D"cite">
<div class=3D"">
On Feb 17, 2022, at 12:01 PM, Joel Martin via Tigers <<a class=3D"=
" href=3D"mailto:tigers@autox.team.net";>tigers@autox.team.net</a>> wrote=
:
</div>
<br class=3D"Apple-interchange-newline">
<div class=3D"">
<div class=3D"">
<div style=3D"font-family: garamond, new york, times, serif; font-si=
ze: 16px;" class=3D"ydp1d3a4e22yahoo-style-wrap">
<div class=3D"">
<br>
</div>
<div class=3D"">
<br class=3D"">
</div>
<div class=3D"">
<br class=3D"">
</div>
</div>
<div class=3D"ydp9d68e9cyahoo_quoted" id=3D"ydp9d68e9cyahoo_quoted_5=
448102710">
<div class=3D"" style=3D"font-family: 'Helvetica Neue', Helvetica, =
Arial, sans-serif; font-size: 13px; color: #26282a;">
<div class=3D"">
On Thursday, February 17, 2022, 05:36:52 AM EST, Joel Martin <=
<a class=3D"" href=3D"mailto:jmartiniii@yahoo.com";>jmartiniii@yahoo.com</a>=
> wrote:
</div>
<div class=3D"">
<br class=3D"">
</div>
<div class=3D"">
<br class=3D"">
</div>
<div class=3D"">
<div class=3D"" id=3D"ydp9d68e9cyiv4866135215">
<div class=3D"ydp9d68e9cyiv4866135215yqt6661734399" id=3D"ydp9d6=
8e9cyiv4866135215yqtfd71559">
<div class=3D"">
<div class=3D"ydp9d68e9cyiv4866135215yahoo-style-wrap" style=
=3D"font-family: garamond, new york, times, serif; font-size: 16px;">
<div class=3D"" style=3D"font-family: 'Helvetica Neue', Helve=
tica, Arial, sans-serif; font-size: 13px; color: #26282a;">
<div class=3D"">
<br class=3D"" clear=3D"none">
<br class=3D"" clear=3D"none">
</div>
<div class=3D"">
<div class=3D"" id=3D"ydp9d68e9cyiv4866135215ydp4386103dyiv=
2504392080">
<div class=3D"">
<div class=3D"ydp9d68e9cyiv4866135215ydp4386103dyiv250439=
2080yahoo-style-wrap" style=3D"font-family: garamond, new york, times, seri=
f; font-size: 16px;">
<div class=3D"" style=3D"font-family: 'Helvetica Neue', =
Helvetica, Arial, sans-serif; font-size: 13px; color: #26282a;">
<div class=3D"" dir=3D"ltr">
<div class=3D"" dir=3D"ltr">
Hello all.
</div>
<div class=3D"" dir=3D"ltr">
<br class=3D"" clear=3D"none">
</div>
<div class=3D"" dir=3D"ltr">
I pulled apart the brake actuator today and the whole=
thing just fell out of the rubber boot? Rubber boot was split. =
There is a circle clip up next to the master cylinder plunger still in pla=
ce.
<br class=3D"" clear=3D"none">
</div>
<br class=3D"" clear=3D"none">
</div>
<div class=3D"ydp9d68e9cyiv4866135215ydp4386103dyiv2504=
392080yqt2517342885" id=3D"ydp9d68e9cyiv4866135215ydp4386103dyiv2504392080y=
qt20913">
<div class=3D"">
<div class=3D"" id=3D"ydp9d68e9cyiv4866135215ydp43861=
03dyiv2504392080ydpf1fea175yiv7324654534">
<div class=3D"">
<div class=3D"ydp9d68e9cyiv4866135215ydp4386103dyiv=
2504392080ydpf1fea175yiv7324654534ydpd23020ecyahoo-style-wrap" style=3D"fon=
t-family: garamond, new york, times, serif; font-size: 16px;">
<div class=3D"" dir=3D"ltr">
Here is a picture of my brake setup which does no=
t match the picture below from the workshop manual.
</div>
<div class=3D"" dir=3D"ltr">
<br class=3D"" clear=3D"none">
</div>
<div class=3D"" dir=3D"ltr">
My question: How is the brake actuating rod=
retained in the master cylinder so it will not come out?
</div>
<div class=3D"" dir=3D"ltr">
<br class=3D"" clear=3D"none">
</div>
<div class=3D"" dir=3D"ltr">
<span id=3D"cid:91maXpEnBkCxi5jjcqfa"><My_Brak=
e_plunger.jpg></span>
<br class=3D"" clear=3D"none">
<br class=3D"" clear=3D"none">
</div>
<div class=3D"">
<br class=3D"" clear=3D"none">
</div>
</div>
<div class=3D"ydp9d68e9cyiv4866135215ydp4386103dyiv=
2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yahoo_quoted" id=3D"ydp9d68e9c=
yiv4866135215ydp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yah=
oo_quoted_5518184998">
<div class=3D"" style=3D"font-family: 'Helvetica N=
eue', Helvetica, Arial, sans-serif; font-size: 13px; color: #26282a;">
<div class=3D"ydp9d68e9cyiv4866135215ydp4386103dy=
iv2504392080ydpf1fea175yiv7324654534yqt1771981381" id=3D"ydp9d68e9cyiv48661=
35215ydp4386103dyiv2504392080ydpf1fea175yiv7324654534yqtfd09627">
<div class=3D"">
On Monday, February 14, 2022, 08:45:16 PM EST, =
<<a class=3D"" href=3D"mailto:tigers-request@autox.team.net";>tigers-requ=
est@autox.team.net</a>> wrote:
</div>
<div class=3D"">
<br class=3D"" clear=3D"none">
</div>
<div class=3D"">
<br class=3D"" clear=3D"none">
</div>
<div class=3D"">
<div class=3D"" dir=3D"ltr">
Send Tigers mailing list submissions to
<br class=3D"" clear=3D"none">
</div>
<div class=3D"" dir=3D"ltr">
<a class=3D"" target=3D"_bl=
ank" href=3D"mailto:tigers@autox.team.net"; shape=3D"rect" rel=3D"noopener">=
tigers@autox.team.net</a>
<br class=3D"" clear=3D"none">
</div>
<div class=3D"" dir=3D"ltr">
<br class=3D"" clear=3D"none">
</div>
<div class=3D"" dir=3D"ltr">
To subscribe or unsubscribe via the World Wide=
Web, visit
<br class=3D"" clear=3D"none">
</div>
<div class=3D"" dir=3D"ltr">
<a class=3D"" target=3D"_bl=
ank" href=3D"http://autox.team.net/mailman/listinfo/tigers"; shape=3D"rect" =
rel=3D"noopener">http://autox.team.net/mailman/listinfo/tigers</a>
<br class=3D"" clear=3D"none">
</div>
<div class=3D"" dir=3D"ltr">
or, via email, send a message with subject or =
body 'help' to
<br class=3D"" clear=3D"none">
</div>
<div class=3D"" dir=3D"ltr">
<a class=3D"" target=3D"_bl=
ank" href=3D"mailto:tigers-request@autox.team.net"; shape=3D"rect" rel=3D"no=
opener">tigers-request@autox.team.net</a>
<br class=3D"" clear=3D"none">
</div>
<div class=3D"" dir=3D"ltr">
<br class=3D"" clear=3D"none">
</div>
<div class=3D"" dir=3D"ltr">
You can reach the person managing the list at
<br class=3D"" clear=3D"none">
</div>
<div class=3D"" dir=3D"ltr">
<a class=3D"" target=3D"_bl=
ank" href=3D"mailto:tigers-owner@autox.team.net"; shape=3D"rect" rel=3D"noop=
ener">tigers-owner@autox.team.net</a>
<br class=3D"" clear=3D"none">
</div>
<div class=3D"" dir=3D"ltr">
<br class=3D"" clear=3D"none">
</div>
<div class=3D"" dir=3D"ltr">
When replying, please edit your Subject line s=
o it is more specific
<br class=3D"" clear=3D"none">
</div>
<div class=3D"" dir=3D"ltr">
than "Re: Contents of Tigers digest..."
<br class=3D"" clear=3D"none">
</div>Today's Topics:
<br class=3D"" clear=3D"none">
<br class=3D"" clear=3D"none"> 1. Brake P=
edal (Joel Martin)
<br class=3D"" clear=3D"none"> 2. Re: Bra=
ke Pedal (Jay)
<br class=3D"" clear=3D"none"> 3. Re: Bra=
ke Pedal (Will Seay)
<br class=3D"" clear=3D"none">
<div class=3D"ydp9d68e9cyiv4866135215ydp4386103=
dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7ymsg5694307234" id=3D"ydp9=
d68e9cyiv4866135215ydp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66b=
fb7ymsg05745">
<div class=3D"" id=3D"ydp9d68e9cyiv4866135215y=
dp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775">
<div class=3D"">
<div class=3D"ydp9d68e9cyiv4866135215ydp4386=
103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775yahoo-styl=
e-wrap" style=3D"font-family: garamond, new york, times, serif; font-size: =
16px;">
<div class=3D"" dir=3D"ltr">
1966 Tiger MK 1A
</div>
<div class=3D"" dir=3D"ltr">
<br class=3D"" clear=3D"none">
</div>
<br class=3D"" clear=3D"none">
<div class=3D"" dir=3D"ltr">
Thanks
<br class=3D"" clear=3D"none">
</div>
</div>
</div>
</div>
</div>
<div class=3D"ydp9d68e9cyiv4866135215ydp4386103=
dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7ymsg5694307234" id=3D"ydp9=
d68e9cyiv4866135215ydp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66b=
fb7ymsg74033">
<div class=3D"" id=3D"ydp9d68e9cyiv4866135215y=
dp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775">
<div class=3D"">
There are so many oddities here. First=
, at one end, the plunger should have a disc at the end, with a circl=
ip that holds it in. That rubber boot would likely hold in the disc, =
even if the circlip broke. So since it =E2=80=9Ccame out=E2=80=9D of =
the rubber, it sounds like the center of the disc is some how flawed.  =
;But FWIW, I can=E2=80=99t imagine how that would happen unless something w=
as quite odd in the assembly.
<div class=3D"ydp9d68e9cyiv4866135215ydp4386=
103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775">
<br class=3D"ydp9d68e9cyiv4866135215ydp4386=
103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" clear=3D=
"none">
</div>
<div class=3D"ydp9d68e9cyiv4866135215ydp4386=
103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775">
<br class=3D"ydp9d68e9cyiv4866135215ydp4386=
103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" clear=3D=
"none">
<div class=3D"">
<br class=3D"ydp9d68e9cyiv4866135215ydp438=
6103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" clear=
=3D"none">
<blockquote type=3D"cite">
<div class=3D"ydp9d68e9cyiv4866135215ydp4=
386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775">
On Feb 14, 2022, at 4:28 PM, Joel Martin=
via Tigers <<a target=3D"_blank" class=3D"ydp9d68e9cyiv4866135215ydp438=
6103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" href=3D=
"mailto:tigers@autox.team.net"; shape=3D"rect" rel=3D"noopener">tigers@autox=
.team.net</a>> wrote:
</div>
<br class=3D"ydp9d68e9cyiv4866135215ydp43=
86103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775Apple-in=
terchange-newline" clear=3D"none">
<div class=3D"ydp9d68e9cyiv4866135215ydp4=
386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775">
<div class=3D"ydp9d68e9cyiv4866135215ydp=
4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775">
<div class=3D"ydp9d68e9cyiv4866135215yd=
p4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775yahoo=
-style-wrap" style=3D"font-family: garamond, new york, times, serif; font-s=
ize: 16px;">
<div class=3D"ydp9d68e9cyiv4866135215y=
dp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" di=
r=3D"ltr">
1966 Tiger MK 1A
</div>
<div class=3D"ydp9d68e9cyiv4866135215y=
dp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" di=
r=3D"ltr">
<br class=3D"ydp9d68e9cyiv4866135215y=
dp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" cl=
ear=3D"none">
</div>
<div class=3D"ydp9d68e9cyiv4866135215y=
dp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" di=
r=3D"ltr">
I had a little scare the other day ba=
cking out of the DMV parking lot. No Brakes. Discovered that th=
e brake plunger had come out of the rubber sleeve going into the master cyl=
inder.
</div>
<div class=3D"ydp9d68e9cyiv4866135215y=
dp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" di=
r=3D"ltr">
<br class=3D"ydp9d68e9cyiv4866135215y=
dp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" cl=
ear=3D"none">
</div>
<div class=3D"ydp9d68e9cyiv4866135215y=
dp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" di=
r=3D"ltr">
The only thing that could have happen=
ed is when I got out, my foot pulled the pedal back towards the interior an=
d this pulled the plunger out.
</div>
<div class=3D"ydp9d68e9cyiv4866135215y=
dp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" di=
r=3D"ltr">
<br class=3D"ydp9d68e9cyiv4866135215y=
dp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" cl=
ear=3D"none">
</div>
<div class=3D"ydp9d68e9cyiv4866135215y=
dp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" di=
r=3D"ltr">
It only had the spring, plunger and r=
ubber plug to hold the plunger into the master cylinder.
</div>
<div class=3D"ydp9d68e9cyiv4866135215y=
dp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" di=
r=3D"ltr">
<br class=3D"ydp9d68e9cyiv4866135215y=
dp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" cl=
ear=3D"none">
</div>
<div class=3D"ydp9d68e9cyiv4866135215y=
dp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" di=
r=3D"ltr">
Is there suppose to be something else=
to hold the plunger in place?
</div>
<div class=3D"ydp9d68e9cyiv4866135215y=
dp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" di=
r=3D"ltr">
<br class=3D"ydp9d68e9cyiv4866135215y=
dp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" cl=
ear=3D"none">
</div>
<div class=3D"ydp9d68e9cyiv4866135215y=
dp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" di=
r=3D"ltr">
Thanks
<br class=3D"ydp9d68e9cyiv4866135215y=
dp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" cl=
ear=3D"none">
</div>
</div>
</div>__________________________________=
_____________
<br class=3D"ydp9d68e9cyiv4866135215ydp4=
386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" clear=
=3D"none">
<br class=3D"ydp9d68e9cyiv4866135215ydp4=
386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" clear=
=3D"none"><a target=3D"_blank" class=3D"ydp9d68e9cyiv4866135215ydp4386103dy=
iv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" href=3D"mailt=
o:tigers@autox.team.net" shape=3D"rect" rel=3D"noopener">tigers@autox.team.=
net</a>
<br class=3D"ydp9d68e9cyiv4866135215ydp4=
386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" clear=
=3D"none">
<br class=3D"ydp9d68e9cyiv4866135215ydp4=
386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" clear=
=3D"none">Donate: <a class=3D"" href=3D"http://www.team.net/donate.html";>ht=
tp://www.team.net/donate.html</a>
<br class=3D"ydp9d68e9cyiv4866135215ydp4=
386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" clear=
=3D"none">Archive: <a class=3D"" href=3D"http://www.team.net/pipermail/tige=
rs">http://www.team.net/pipermail/tigers</a> <a class=3D"" href=3D"http://a=
utox.team.net/archive">http://autox.team.net/archive</a>
<br class=3D"ydp9d68e9cyiv4866135215ydp4=
386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" clear=
=3D"none">
<br class=3D"ydp9d68e9cyiv4866135215ydp4=
386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" clear=
=3D"none">Unsubscribe: <a class=3D"" href=3D"http://autox.team.net/mailman/=
options/tigers/jay.laifman@gmail.com">http://autox.team.net/mailman/options=
/tigers/jay.laifman@gmail.com</a>
<br class=3D"ydp9d68e9cyiv4866135215ydp4=
386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" clear=
=3D"none">
<br class=3D"ydp9d68e9cyiv4866135215ydp4=
386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" clear=
=3D"none">
<br class=3D"ydp9d68e9cyiv4866135215ydp4=
386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" clear=
=3D"none">
</div>
</blockquote>
</div>
<br class=3D"ydp9d68e9cyiv4866135215ydp4386=
103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775" clear=3D=
"none">
</div>
</div>
</div>
</div>
<div class=3D"ydp9d68e9cyiv4866135215ydp4386103=
dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7ymsg5694307234" id=3D"ydp9=
d68e9cyiv4866135215ydp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66b=
fb7ymsg71282">
<div class=3D"" id=3D"ydp9d68e9cyiv4866135215y=
dp4386103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775">
<div class=3D"" dir=3D"ltr">
<div class=3D"ydp9d68e9cyiv4866135215ydp4386=
103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775gmail_defa=
ult" style=3D"font-size: small;">
Joel,
</div>
<div class=3D"ydp9d68e9cyiv4866135215ydp4386=
103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775gmail_defa=
ult" style=3D"font-size: small;">
Your master cylinder was apparently assembl=
ed without the circlip. See #2 in the attached from the workshop manu=
al.
</div>
<div class=3D"ydp9d68e9cyiv4866135215ydp4386=
103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775gmail_defa=
ult" style=3D"font-size: small;">
<br class=3D"" clear=3D"none">
</div>
<div class=3D"">
<div class=3D"ydp9d68e9cyiv4866135215ydp438=
6103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775gmail_sig=
nature" dir=3D"ltr">
<div class=3D"" dir=3D"ltr">
Will - 382001570=20
<br class=3D"" clear=3D"none"><a class=3D=
"" target=3D"_blank" href=3D"mailto:Tigers@embarqmail.com"; shape=3D"rect" r=
el=3D"noopener">Tigers@embarqmail.com</a>
<br>
</div>
</div>
</div>
<br class=3D"" clear=3D"none">
</div>
<br class=3D"" clear=3D"none">
<div class=3D"ydp9d68e9cyiv4866135215ydp43861=
03dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775gmail_quote=
">
<div class=3D"ydp9d68e9cyiv4866135215ydp4386=
103dyiv2504392080ydpf1fea175yiv7324654534ydp1f66bfb7yiv7277777775gmail_attr=
" dir=3D"ltr">
On Mon, Feb 14, 2022 at 7:28 PM Joel Martin=
via Tigers <<a class=3D"" target=3D"_blank" href=3D"mailto:tigers@autox=
.team.net" shape=3D"rect" rel=3D"noopener">tigers@autox.team.net</a>> wr=
ote:
<br class=3D"" clear=3D"none">
</div>
<blockquote>
<div class=3D"">
<div class=3D"" style=3D"font-family: gara=
mond, times, serif; font-size: 16px;">
<div class=3D"" dir=3D"ltr">
1966 Tiger MK 1A
</div>
<div class=3D"" dir=3D"ltr">
<br class=3D"" clear=3D"none">
</div>
<div class=3D"" dir=3D"ltr">
I had a little scare the other day backi=
ng out of the DMV parking lot. No Brakes. Discovered that the b=
rake plunger had come out of the rubber sleeve going into the master cylind=
er.
</div>
<div class=3D"" dir=3D"ltr">
<br class=3D"" clear=3D"none">
</div>
<div class=3D"" dir=3D"ltr">
The only thing that could have happened =
is when I got out, my foot pulled the pedal back towards the interior and t=
his pulled the plunger out.
</div>
<div class=3D"" dir=3D"ltr">
<br class=3D"" clear=3D"none">
</div>
<div class=3D"" dir=3D"ltr">
It only had the spring, plunger and rubb=
er plug to hold the plunger into the master cylinder.
</div>
<div class=3D"" dir=3D"ltr">
<br class=3D"" clear=3D"none">
</div>
<div class=3D"" dir=3D"ltr">
Is there suppose to be something else to=
hold the plunger in place?
</div>
<div class=3D"" dir=3D"ltr">
<br class=3D"" clear=3D"none">
</div>
<div class=3D"" dir=3D"ltr">
Thanks
<br class=3D"" clear=3D"none">
</div>
</div>
</div>_____________________________________=
__________
<br class=3D"" clear=3D"none">
<br class=3D"" clear=3D"none"><a class=3D""=
target=3D"_blank" href=3D"mailto:tigers@autox.team.net"; shape=3D"rect" rel=
=3D"noopener">tigers@autox.team.net</a>
<br class=3D"" clear=3D"none">
<br class=3D"" clear=3D"none">Donate: <a cl=
ass=3D"" target=3D"_blank" href=3D"http://www.team.net/donate.html"; shape=
=3D"rect" rel=3D"noopener">http://www.team.net/donate.html</a>
<br class=3D"" clear=3D"none">Archive: <a c=
lass=3D"" target=3D"_blank" href=3D"http://www.team.net/pipermail/tigers"; s=
hape=3D"rect" rel=3D"noopener">http://www.team.net/pipermail/tigers</a> <a =
class=3D"" target=3D"_blank" href=3D"http://autox.team.net/archive"; shape=
=3D"rect" rel=3D"noopener">http://autox.team.net/archive</a>
<br class=3D"" clear=3D"none">
<br class=3D"" clear=3D"none">Unsubscribe: =
<a class=3D"" target=3D"_blank" href=3D"http://autox.team.net/mailman/optio=
ns/tigers/tigers@embarqmail.com" shape=3D"rect" rel=3D"noopener">http://aut=
ox.team.net/mailman/options/tigers/tigers@embarqmail.com</a>
<br class=3D"" clear=3D"none">
<br class=3D"" clear=3D"none">
<br class=3D"" clear=3D"none">
</blockquote>
</div>
</div>
</div>_________________________________________=
______
<br class=3D"" clear=3D"none">Tigers mailing li=
st
<br class=3D"" clear=3D"none"><a class=3D"" tar=
get=3D"_blank" href=3D"mailto:Tigers@autox.team.net"; shape=3D"rect" rel=3D"=
noopener">Tigers@autox.team.net</a>
<br class=3D"" clear=3D"none"><a class=3D"" tar=
get=3D"_blank" href=3D"http://autox.team.net/mailman/listinfo/tigers"; shape=
=3D"rect" rel=3D"noopener">http://autox.team.net/mailman/listinfo/tigers</a=
>
<br class=3D"" clear=3D"none">
<br class=3D"" clear=3D"none">Donate: <a class=
=3D"" target=3D"_blank" href=3D"http://www.team.net/donate.html"; shape=3D"r=
ect" rel=3D"noopener">http://www.team.net/donate.html</a>
<br class=3D"" clear=3D"none">Archive: <a class=
=3D"" target=3D"_blank" href=3D"http://www.team.net/pipermail/tigers"; shape=
=3D"rect" rel=3D"noopener">http://www.team.net/pipermail/tigers </a><a clas=
s=3D"" target=3D"_blank" href=3D"http://autox.team.net/archive"; shape=3D"re=
ct" rel=3D"noopener">http://autox.team.net/archive</a>
<br class=3D"" clear=3D"none">
</div>
</div>
</div>
<div class=3D"ydp9d68e9cyiv4866135215ydp4386103dyi=
v2504392080ydpf1fea175yiv7324654534yqt1771981381" id=3D"ydp9d68e9cyiv486613=
5215ydp4386103dyiv2504392080ydpf1fea175yiv7324654534yqtfd43556">
<br>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
<div class=3D"ydp9d68e9cyiv4866135215ydp4386103dyiv25043=
92080ydpf1fea175yahoo_quoted" id=3D"ydp9d68e9cyiv4866135215ydp4386103dyiv25=
04392080ydpf1fea175yahoo_quoted_5163839024">
<br>
</div>
</div>
</div>
</div>
</div>
</div>
<div class=3D"ydp9d68e9cyiv4866135215ydp4386103dyahoo_quoted"=
id=3D"ydp9d68e9cyiv4866135215ydp4386103dyahoo_quoted_5108026721">
<br>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div><span id=3D"cid:91maXpEnBkCxi5jjcqfa"><My_Brake_plunger.jpg&=
gt;</span>_______________________________________________
<br class=3D"">
<br class=3D""><a class=3D"" href=3D"mailto:tigers@autox.team.net";>ti=
gers@autox.team.net</a>
<br class=3D"">
<br class=3D"">Donate: http://www.team.net/donate.html
<br class=3D"">Archive: http://www.team.net/pipermail/tigers http://a=
utox.team.net/archive
<br class=3D"">
<br class=3D"">Unsubscribe: http://autox.team.net/mailman/options/tig=
ers/jay.laifman@gmail.com
<br class=3D"">
<br class=3D"">
<br class=3D"">
</div>
</blockquote>
</div>
<br class=3D"">_______________________________________________
<br>
<br>tigers@autox.team.net
<br>
<br>Donate: http://www.team.net/donate.html
<br>Archive: http://www.team.net/pipermail/tigers http://autox.team.net/=
archive
<br>
<br>Unsubscribe: http://autox.team.net/mailman/options/tigers/garywinbla=
d@comcast.net
<br>
<br>
<br>
</blockquote>
</body>
</html>
------=_Part_806707_111195856.1645132994638--
--===============0196842995031377054==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
--===============0196842995031377054==--
|