tigers
[Top] [All Lists]

Re: [Tigers] Boss 302 carb spacer with PCV port

To: rfraser@bluefrog.com, tigers@Autox.Team.Net
Subject: Re: [Tigers] Boss 302 carb spacer with PCV port
From: Michael Wood via Tigers <tigers@autox.team.net>
Date: Mon, 29 Aug 2016 11:48:37 -0400
Delivered-to: mharc@autox.team.net
Delivered-to: tigers@autox.team.net
References: <000201d2020a$a25bcf20$e7136d60$@bluefrog.com>
Thanks'

I found a vendor that lists a repro Boss spacer and ordered last night. Now, to 
see if they confirm...

Sent from AOL Mobile Mail


-----Original Message-----
From: Ron Fraser <rfraser@bluefrog.com>
To: 'Michael Wood' <mwood24020@aol.com>; tigers <tigers@Autox.Team.Net>
Sent: Mon, Aug 29, 2016 08:33 AM
Subject: RE: [Tigers] Boss 302 carb spacer with PCV port



Mike                I did a Google search for thin carb spacer w/ PCV port.This 
showed up;Trans Dapt  2094 â?? 3/8â?? thick with PCV port No experience with 
this product but it looks like it is available at Summit, Jegs and others. Hope 
that helps Ron Fraser From: Tigers [mailto:tigers-bounces@autox.team.net] On 
Behalf Of Michael Wood via Tigers
Sent: Sunday, August 28, 2016 3:40 PM
To: tigers@autox.team.net
Subject: [Tigers] Boss 302 carb spacer with PCV port Anyone know of a current 
source for a thin carb spacer with PCV port? I know that the original Boss 302 
plate (1/4") was being reproduced, but the old sources like NPD don't seem to 
have them in stock any longer...
Thanks
Mike
_______________________________________________

tigers@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>