Robert:
If it were just the temp and fuel gauges going out, I would say more than
likely "yes." However, if I remember correctly, the tach operates
independently of the voltage stabilizer. All the gauges you mention, however,
are fed from the green wires running out of the fuse block. I would start
there and check all the connections first (as well as the fuse), then go
further out into the green circuit if necessary.
Keep us posted,
Andy Walker
---- "Robert J. Wanty via Tigers" <tigers@autox.team.net> wrote:
> My 1966 Tiger Water, fuel and tack gages quit working a few seconds
> after startup. I checked the ground and it seems to be ok. Do you think
> that maybe the voltage stabilizer is going?
> Thanks
>
>
>
> Bob
>
> B382001318
>
>
>
>
>
>
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|