--===============6732656415345967862==
boundary="Apple-Mail=_04AC4F7B-AB15-4667-9CCA-50EA35CF36CF"
--Apple-Mail=_04AC4F7B-AB15-4667-9CCA-50EA35CF36CF
Content-Transfer-Encoding: quoted-printable
charset=windows-1252
Very interesting article, which shows how much work and money is needed =
to get HP from a 260 ci engine. When I see claims of 300hp from a 260 =
in a Tiger, I am reminded of how much work it is to get this kind of hp, =
as noted in this article.=20
I had an early 2 door Fairlane with a 221ci and 3 speed, which was a =
lot of fun, and a nice family car.=20
My Tiger has a 1990 Mustang 5.0L with F4B, double pumper Holley, roller =
rockers and roller cam (stock), which dyno=92ed at 297 hp at 4800 rpm =
and torque at 347. I gave away a 289 HiPo to a friend, cause I wanted a =
toque engine, not a high rpm engine.
HP is great for bragging, but it is torque that gets you going.
Larry
BTW got engine, T5 trans and all FI including hardness and box for $1200 =
delivered from local junk yard, after I saw car and engine running in =
the car. Cost per hp and torque is hard to beat with CI.
On Jun 20, 2015, at 7:19 PM, Scott Hutchinson via Tigers =
<tigers@autox.team.net> wrote:
> http://www.wrljet.com/fordv8/indy.html
>=20
>=20
> Sent from my iPhone
>=20
> On Jun 20, 2015, at 7:10 PM, Mark Rense via Tigers =
<tigers@autox.team.net> wrote:
>=20
>> Lot=92s of issues chasing horsepower with a 260 project. The 260=92s =
smaller bore restricts valve size, valve shrouding occurs with any valve =
bigger than 1.85=94. The stock pistons barely produced 8.5:1 compression =
even with the small-chamber heads, shaving the heads enough to get real =
compression brings squish zones down to a few thousands and screws up =
flame front propagation, so there is only so much that can be gained, =
plus the castings can=92t support the port sizes needed for modern =
induction. Sure you can spin one to 8 grand but it won=92t make much =
power because it won=92t breath, but I suppose a four valve per cylinder =
head would cure that!
>> =20
>> Once you decide to spend the $900 for custom pistons then doors open. =
A 3.40=94 stroke crank brings 313 cubic inches, and better breathing =
heads, a full roller cam and valve train, and modern intakes all help =
build torque. Still not a revver but a good street engine.
>> =20
>> Of course you have to ask yourself WHY? I mean, who is going to know =
which block is in your car? Who cares? Well some folks do, since I have =
built a couple 260=92s for them. To them, bragging rights that it=92s =
the original engine are important. Others just prefer stashing the old =
260 under the bench and building something more modern. That=92s what I =
did with both my Tigers, both sport 5-bolt 289 based engines.
>> =20
>> I just finished another 5-bolt 331 engine (all Ford Motorsport =
components this time) and have two more 5-bolt blocks left, then I think =
I=92m done.
>> =20
>> Bugz
>> PS If you REALLY want a challenge I ran across a first-year 221 SBF=85
>> _______________________________________________
>>=20
>> tigers@autox.team.net
>>=20
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe: =
http://autox.team.net/mailman/options/tigers/shutchin@netjets.com
>>=20
>>=20
>=20
> *** *** ***
> This message contains information which may be confidential and =
privileged. Unless you are the addressee (or authorized to receive for =
the addressee), you may not use, copy or disclose to anyone the message =
or any information contained in the message. If you have received the =
message in error, please advise the sender by reply e-mail and delete =
the message.
>=20
> _______________________________________________
>=20
> tigers@autox.team.net
>=20
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: =
http://autox.team.net/mailman/options/tigers/lpaulick1@verizon.net
--Apple-Mail=_04AC4F7B-AB15-4667-9CCA-50EA35CF36CF
Content-Transfer-Encoding: quoted-printable
charset=windows-1252
<html><head><meta http-equiv=3D"Content-Type" content=3D"text/html =
charset=3Dwindows-1252"></head><body style=3D"word-wrap: break-word; =
-webkit-nbsp-mode: space; -webkit-line-break: after-white-space;">Very =
interesting article, which shows how much work and money is needed to =
get HP from a 260 ci engine. When I see claims of 300hp from a 260 =
in a Tiger, I am reminded of how much work it is to get this kind of hp, =
as noted in this article. <div><br></div><div>I had an early =
2 door Fairlane with a 221ci and 3 speed, which was a lot of fun, and a =
nice family car. </div><div><br></div><div>My Tiger has a 1990 =
Mustang 5.0L with F4B, double pumper Holley, roller rockers and roller =
cam (stock), which dyno=92ed at 297 hp at 4800 rpm and torque at 347. =
I gave away a 289 HiPo to a friend, cause I wanted a toque engine, =
not a high rpm engine.</div><div><br></div><div>HP is great for =
bragging, but it is torque that gets you =
going.</div><div><br></div><div>Larry</div><div><br></div><div>BTW got =
engine, T5 trans and all FI including hardness and box for $1200 =
delivered from local junk yard, after I saw car and engine running in =
the car. Cost per hp and torque is hard to beat with =
CI.</div><div><br></div><div><br><div><div>On Jun 20, 2015, at 7:19 PM, =
Scott Hutchinson via Tigers <<a =
href=3D"mailto:tigers@autox.team.net";>tigers@autox.team.net</a>> =
wrote:</div><br class=3D"Apple-interchange-newline"><blockquote =
type=3D"cite"><div dir=3D"auto" style=3D"font-family: Times-Roman; =
font-size: 24px; font-style: normal; font-variant: normal; font-weight: =
normal; letter-spacing: normal; line-height: normal; orphans: auto; =
text-align: start; text-indent: 0px; text-transform: none; white-space: =
normal; widows: auto; word-spacing: 0px; -webkit-text-stroke-width: =
0px;"><div><a href=3D"http://www.wrljet.com/fordv8/indy.html"; =
style=3D"color: rgb(149, 79, 114); text-decoration: =
underline;">http://www.wrljet.com/fordv8/indy.html</a></div><div><br></div=
><div><br>Sent from my iPhone</div><div><br>On Jun 20, 2015, at 7:10 PM, =
Mark Rense via Tigers <<a href=3D"mailto:tigers@autox.team.net"; =
style=3D"color: rgb(149, 79, 114); text-decoration: =
underline;">tigers@autox.team.net</a>> =
wrote:<br><br></div><blockquote type=3D"cite"><div class=3D"WordSection1" =
style=3D"page: WordSection1;"><div style=3D"margin: 0in 0in 0.0001pt; =
font-size: 11pt; font-family: Calibri, sans-serif;">Lot=92s of issues =
chasing horsepower with a 260 project. The 260=92s smaller bore =
restricts valve size, valve shrouding occurs with any valve bigger than =
1.85=94. The stock pistons barely produced 8.5:1 compression even with =
the small-chamber heads, shaving the heads enough to get real =
compression brings squish zones down to a few thousands and screws up =
flame front propagation, so there is only so much that can be gained, =
plus the castings can=92t support the port sizes needed for modern =
induction. Sure you can spin one to 8 grand but it won=92t make much =
power because it won=92t breath, but I suppose a four valve per cylinder =
head would cure that!<o:p></o:p></div><div style=3D"margin: 0in 0in =
0.0001pt; font-size: 11pt; font-family: Calibri, =
sans-serif;"><o:p> </o:p></div><div style=3D"margin: 0in 0in =
0.0001pt; font-size: 11pt; font-family: Calibri, sans-serif;">Once you =
decide to spend the $900 for custom pistons then doors open. A 3.40=94 =
stroke crank brings 313 cubic inches, and better breathing heads, a full =
roller cam and valve train, and modern intakes all help build torque. =
Still not a revver but a good street engine.<o:p></o:p></div><div =
style=3D"margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: =
Calibri, sans-serif;"><o:p> </o:p></div><div style=3D"margin: 0in =
0in 0.0001pt; font-size: 11pt; font-family: Calibri, sans-serif;">Of =
course you have to ask yourself WHY? I mean, who is going to know which =
block is in your car? Who cares? Well some folks do, since I have built =
a couple 260=92s for them. To them, bragging rights that it=92s the =
original engine are important. Others just prefer stashing the old =
260 under the bench and building something more modern. That=92s what I =
did with both my Tigers, both sport 5-bolt 289 based =
engines.<o:p></o:p></div><div style=3D"margin: 0in 0in 0.0001pt; =
font-size: 11pt; font-family: Calibri, =
sans-serif;"><o:p> </o:p></div><div style=3D"margin: 0in 0in =
0.0001pt; font-size: 11pt; font-family: Calibri, sans-serif;">I just =
finished another 5-bolt 331 engine (all Ford Motorsport components this =
time) and have two more 5-bolt blocks left, then I think I=92m =
done.<o:p></o:p></div><div style=3D"margin: 0in 0in 0.0001pt; font-size: =
11pt; font-family: Calibri, sans-serif;"><o:p> </o:p></div><div =
style=3D"margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: =
Calibri, sans-serif;">Bugz<o:p></o:p></div><div style=3D"margin: 0in 0in =
0.0001pt; font-size: 11pt; font-family: Calibri, sans-serif;">PS If you =
REALLY want a challenge I ran across a first-year 221 =
SBF=85<o:p></o:p></div></div></blockquote><blockquote =
type=3D"cite"><span>_______________________________________________</span>=
<br><span></span><br><span><a href=3D"mailto:tigers@autox.team.net"; =
style=3D"color: rgb(149, 79, 114); text-decoration: =
underline;">tigers@autox.team.net</a></span><br><span></span><br><span>Don=
ate:<span class=3D"Apple-converted-space"> </span><a =
href=3D"http://www.team.net/donate.html"; style=3D"color: rgb(149, 79, =
114); text-decoration: =
underline;">http://www.team.net/donate.html</a></span><br><span>Archive:<s=
pan class=3D"Apple-converted-space"> </span><a =
href=3D"http://www.team.net/archive"; style=3D"color: rgb(149, 79, 114); =
text-decoration: =
underline;">http://www.team.net/archive</a></span><br><span>Forums:<span =
class=3D"Apple-converted-space"> </span><a =
href=3D"http://www.team.net/forums"; style=3D"color: rgb(149, 79, 114); =
text-decoration: =
underline;">http://www.team.net/forums</a></span><br><span>Unsubscribe:<sp=
an class=3D"Apple-converted-space"> </span><a =
href=3D"http://autox.team.net/mailman/options/tigers/shutchin@netjets.com"=
style=3D"color: rgb(149, 79, 114); text-decoration: =
underline;">http://autox.team.net/mailman/options/tigers/shutchin@netjets.=
com</a></span><br><span></span><br><span></span><br></blockquote><p><br>**=
* *** ***<br>This message contains information which may be confidential =
and privileged. Unless you are the addressee (or authorized to receive =
for the addressee), you may not use, copy or disclose to anyone the =
message or any information contained in the message. If you have =
received the message in error, please advise the sender by reply =
e-mail and delete the =
message.</p>_______________________________________________<br><br><a =
href=3D"mailto:tigers@autox.team.net"; style=3D"color: rgb(149, 79, 114); =
text-decoration: =
underline;">tigers@autox.team.net</a><br><br>Donate:<span =
class=3D"Apple-converted-space"> </span><a =
href=3D"http://www.team.net/donate.html"; style=3D"color: rgb(149, 79, =
114); text-decoration: =
underline;">http://www.team.net/donate.html</a><br>Archive:<span =
class=3D"Apple-converted-space"> </span><a =
href=3D"http://www.team.net/archive"; style=3D"color: rgb(149, 79, 114); =
text-decoration: =
underline;">http://www.team.net/archive</a><br>Forums:<span =
class=3D"Apple-converted-space"> </span><a =
href=3D"http://www.team.net/forums"; style=3D"color: rgb(149, 79, 114); =
text-decoration: =
underline;">http://www.team.net/forums</a><br>Unsubscribe:<span =
class=3D"Apple-converted-space"> </span><a =
href=3D"http://autox.team.net/mailman/options/tigers/lpaulick1@verizon.net=
" style=3D"color: rgb(149, 79, 114); text-decoration: =
underline;">http://autox.team.net/mailman/options/tigers/lpaulick1@verizon=
.net</a></div></blockquote></div><br></div></body></html>=
--Apple-Mail=_04AC4F7B-AB15-4667-9CCA-50EA35CF36CF--
--===============6732656415345967862==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
--===============6732656415345967862==--
|