Stu
Try a boat/ marine supply type store.
Ron Fraser
-----Original Message-----
From: Tigers [mailto:tigers-bounces@autox.team.net] On Behalf Of Stu Brennan
Sent: Saturday, June 07, 2014 2:27 PM
To: tigers@autox.team.net
Subject: [Tigers] Fuel shutoff
My fuel pump project got delayed again by an article in the current TE/AE
newsletter. John Logan added a shutoff valve to his fuel line, under the
trunk floor, which led me to decide I really should add a valve to my pump
and filter relocation project. John used a hardware store valve that seems
to be surviving exposure to fuel, but I started a search for a valve
intended for fuel applications.
An internet search turned up numerous valves, but most of them seem to be
intended for lawn maintenance equipment, or small motorcycles. I'm
concerned that any of these could prove to be a flow restriction for
automotive flow rates.
The ideal valve would be an all metal "ball valve" type, a 1/4 turn to
actuate, that when open provides little if any flow restriction. I'm still
using the stock 5/16 size pipe, and would want to connect to this as simply
as possible.
Can anyone recommend a source for this sort of valve?
Stu Brennan
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4592 / Virus Database: 3955/7661 - Release Date: 06/11/14
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|