Seriously?
I had my fingers in there with a very stubby phillips screwdriver and
couldn't get leverage on the one screw I could get to. I gave up figuring
if I couldn't do that one, the three inside were going to be impossible.
I'm going to have to look again and see if I can get my allen key type
phillips screw driver in there.
Jay
On Mon, Jun 3, 2013 at 12:49 PM, csx2282 <csx2282@sonic.net> wrote:
> I was able to fixed a leaky accelerator pump on my Holley by replacing the
> diaphragm. I didn't even have to remove the carb.
>
> Roland
>
> ------------------------------
>
>> From: Jay Laifman <jay.laifman@gmail.com>
>>
>> On the flip side, I noticed that the Holley is dripping gas out the
>> bottom,
>> from what looks like an accelerator pump. Looks like the carb needs to
>> come
>> out to service it.
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|