Joel,
There is no mounting plate for the regulator. It mounts directly to the wall of
the fender well. Parts manual shows the C2AF-10505-A number.
Number on the starter solenoid for my 1A is 2710966.
Can't find a part number on my original fuse box. Connectors on the box are
tinned brass, probably the same as your P/N 54038033. The tinned brass may look
like steel but isn't steel.
Hope this helps..
Will Seay 382001570
wseay@embarqmail.com
"I think not therefore I am not" (anon)
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net] On
Behalf Of Joel Martin
Sent: Monday, April 29, 2013 2:32 PM
To: Tiger List Serve
Subject: [Tigers] Today's Issue - voltage Regulator mounting, solenoid & fuse
box
All
1966 MK 1 A - looks like the voltage regulator mounts to a plate on the drivers
side fendor by the bulkhead. Appears mine is missing this plate.- was this
plate welded or bolted on? Can anyone provide the 'dimenstions', thickness -
might have to make one and paint it body color or did the MK 1A regulator bolt
elsewhere?
What is the correct regulator - 6100047 or C2AF-10505-A - the options I have
found are FoMoCo with CATF or FoMoCo with C2DF or Autolite C5AF blue with yellow
for generator equiped cars?
What is the correct Solenoid C4AF-11450-A or -B?? bakelite finish with FoMoCo
logo and 2710966 stamping or FoMoCo logo and brown finish or FoMoCo black logo
and 2701966.
What is the correct Fuse unit 54038033 with steel connectors or 54038068 with
cooper connectors?
Thanks
Joel Martin
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|