I got the rebuild kits for the master and slave from Rick. There is an extra
rubber piece in the master kit that I don't know where it goes. There was the
dust cap. There was the seal that goes into the piston. There is the small
seal that goes under the plastic part at the end of the rod attached to the
piston. I got all those. But there is one more rubber ring. It is bevelled.
I have no idea where it goes. It's not on the car, and I don't recall one
like it on previous masters that I've rebuilt. It is about big enough to go
around the end of the plunger, between the plunger and the plate that holds
the plunger in. But, that doesn't really make sense - unless just one more
possible dust seal.
I have a picture I can email if it would help.
Thanks,
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|