Ron,
You mention the reference stating the length of the C3AZ-7515-A fork being
9-1/4", all other references to that part number list the length as 10".
That's the kind of confusion that exists between various vendors and lists.
Hopefully we can get it right this time. The post dropped the photo with
desired measurement points so I will happily email the photo/drawing to
anyone who requests. Request at johnp@ciseast.com . An additional item
responders might include is any part numbers stamped into the part and a
photo.
john
.
-----Original Message-----
From: Ron Fraser [mailto:rfraser@bluefrog.com]
Sent: Tuesday, March 05, 2013 2:50 PM
To: genepadgett@comcast.net; johnp@ciseast.com
Cc: tigers@autox.team.net
Subject: RE: [Tigers] Clutch fork.... Still....
Gene
Since the C3AZ-7515-A part is no longer available, I suggest you
take pictures and document your Tiger clutch fork for the Tiger community.
The CAT forum indicates the Tiger clutch fork is 9 1/4" long
The replacement listed on the CAT Forum - Mustangs Unlimited part # 37515B
01 - $59.95
That replacement clutch fork appears to be for 65/66 6 cyl - C3DZ-7515-B
I can not verify this. I don't have the parts available to compare.
Hopefully others will join in on this thread to verify a replacement clutch
fork for the Tiger without going to a hydraulic throw out bearing.
Ron Fraser
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of genepadgett@comcast.net
Sent: Tuesday, March 05, 2013 12:36 PM
To: johnp@ciseast.com
Cc: tigers@autox.team.net
Subject: Re: [Tigers] Clutch fork.... Still....
There is a response to a similar question on the CAT Forum a while back with
a part number and source as well as info on how to modify a more frequently
found fork to make it work. Never saw any response to it as to whether it
worked out or not. Have a look at
http://catmbr.org/VB_forum/showthread.php?t=1874&highlight=clutch+fork for
the details.
My trans and clutch are out of my car right now too. If the info in the
above link does not work for you, I can make a hand drawing of the fork end
with approximate dimensions and e-mail it to you if you still need it. Let
me know.
Gene
-
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|