Curt,
I know you will get all the answers from the other members of the list but
the plywood should be a 5 or 7 layer Baltic birch (can't remember which).
Resist the temptation to go with something more readily available since it
will be rougher and not as strong. I believe the original was Baltic birch
as well. It has very tight laminations and no (or very few) voids.
Cabinet shops and most wood stores will carry it.
Also know that one of the brackets is shorter than the others because it
fits under the popup that covers the battery
Good luck,
Lynn
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of Curt Hoffman
Sent: Sunday, February 03, 2013 1:59 PM
To: tigers@autox.team.net
Subject: [Tigers] Truck bracket location
I am making a new plywood trunk "floor" for my Tiger. Wanted to check stock
installation since I am not sure the one that is in my car is original.
Do the brackets that support the floor and hang off the front bulkhead mount
on top of the plywood and get covered by the vinyl, or do they mount
underneath the plywood and are exposed when you lift the plywood floor?
Thanks,
Curt
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/cars@wt-inc.com
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|