A filter that I use (with 3/8 tubing) is Fram #3727, when you see it you'll
see why, very large inlet and outlets. The problem is the type of fitting
that you have to use on both ends. It's not a simple pipe thread or normal
flared fitting. I have no idea what car the filter is designed for, but I
took it down to the local hydraulic supply house and was able to get an
adapter for each end that allowed me to end up with an AN fitting on both
ends that I was able to connect my tubing to.
Perhaps someone on the list knows just what type of fitting it's designed
for. They are sold at Wal-Mart.
I've had it on the car for more than ten years.
Jerry Christopherson
9473187
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of Ron Fraser
Sent: Thursday, November 29, 2012 3:55 PM
To: 'Joel Martin'
Cc: 'Tiger List Serve'
Subject: Re: [Tigers] Photo Gallery
Joel
Sometimes the picture gallery of Tigers for sale show undercarriage;
you might want to look for any Tiger listed online.
The original fuel filter for both Mk I and II is C2RZ-9155-A with
clinch type hose clamps. Today's equivalent is Fram G2 for 5/16" fuel line.
You would need a different filter for the 3/8" line. I believe I have a
picture of the stock location of the fuel filter for a MK I. I will do a
search and send separately.
Ron Fraser
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of Joel Martin
Sent: Thursday, November 29, 2012 3:28 PM
To: Buck Trippel
Cc: Tiger List Serve
Subject: Re: [Tigers] Photo Gallery
Buck
Thanks for the update - any pictures at all regarding brake and fuel line
routing. That is next on my list to install while I have access to a lift
and before I have to move car from paint\body shop.
I bought the brake line kit from SS and plan to up the fuel line size from
5/16" to 3/8" due to 65 HiPo motor and thinking about a Holly Red electric
fuel pump 12-801-1 with a fuel filter before inlet and one at the 'front
right side of of engine' but not sure where that is and which filters would
be period correct.
Any ideas or pictures to get me over the hump.
Again, thanks for the reply.
Joel
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe:
http://autox.team.net/mailman/options/tigers/jcmc2006@suddenlink.net
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|