Remember that if you change the lines to 3/8" you may want to check the pipe
size coming out of the cross over tube to make sure it is not a restriction
to the overall system.
I can't remember what size it is but I know it is smaller than my new fuel
line so I'm speaking from experience.
Lynn
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of Owain Lloyd
Sent: Tuesday, November 13, 2012 2:35 PM
To: Joel Martin
Cc: tigers@autox.team.net
Subject: Re: [Tigers] Brake & Fuel Line Routing
The stock lines are 5/16". If you have over about 250-280hp you probably
want to change to 3/8" though.
On Tuesday, November 13, 2012, Joel Martin wrote:
> I am ready to install new brake and fuel lines on a 1966 MK1A. Does
> anyone have any good diagram or pictures as to the routing of the
> lines? Also, what diameter is the fuel lines suppose to be?
>
> Thanks in advance.
>
> Joel Martin
> _______________________________________________
>
> tigers@autox.team.net <javascript:;>
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/owain.lloyd@gmail.com
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/cars@wt-inc.com
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|