The last cap I bought was in Rapid City, after my Tiger hurled the contents of
its cooling system all over the top of Mt. Rushmore.
Seems to me they (NAPA, IIRC) had caps on a card rack and I just picked one
that had the pressure rating I was looking for. If you're running a coolant
recovery system you will want to be sure that the cap will function correctly
in such an application (i.e. there needs to be a center reverse valve in the
cap).
If you're running a heater core (or if you have the cap plumbed into the cold
side of the rad) then be careful about getting too high a pressure rating,
because the heater core tank sides are not that strong.
By default I think something like a '65 Mustang application will work fine.
Theo
This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient. If you are not the intended recipient, please
be aware that any disclosure, copying, distribution or use of this e-mail or
any attachment is prohibited. If you have received this e-mail in error,
please contact the sender and delete all copies.
Thank you for your cooperation.
_______________________________________________
tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/tigers/tigers-archive@autox.team.net
|