tigers
[Top] [All Lists]

Re: [Tigers] Oil filter question

To: CALUMETAIR@aol.com
Subject: Re: [Tigers] Oil filter question
From: stubrennan@comcast.net
Date: Wed, 18 Jan 2012 21:37:27 +0000 (UTC)
You could run the shorty, if you can find the source.B  Another option would
be to convert to the right angle adapter:

B 

http :// www . tigersunited
.com/resources/Dealer_Accessories/mp-FilterAdapter2.asp

B 

This may not work with headers, but with the stock manifolds it's no
problem.B  You can run the full size FL-1/PH8A size if you do some harmless
grinding on the motor mount, or run the FL400/PH3600 size, smaller diameter
but the same thread, gasket, bypass pressure, etc.

B 

Stu
_______________________________________________

tigers@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>