Its a press fit. Grab with pliers and pull with a gently rotating motion.
Most likely they are rusty and will snap off.
Then you drill them out and get a replacement kit from any Mustang supplier.
Erich
---- George Re <mgman71@comcast.net> wrote:
> I am just about to send my manifolds out for coating but have run into a
>small problem. There are 2 tubes on the Right manifold one goes to the choke
>and one goes to the bottom of the air cleaner HOW do you remove the tube (the
>one that goes to the bottom of the cleaner) from the manifold? I have no idea
>and can not find any info on it. Thanks in advance
>
> George Re
> _______________________________________________
>
> tigers@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/tigers/e.coiner@cox.net
_______________________________________________
tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|