Will,
There is a lot of original documentation, including the Workshop Manual,
on TigersUnited.com
One "pot full" of documents can be found at the Bottom Left side hot
link box on every page.
The "See Rootes Resources" will lead you to a number of them, including
the Part Lists, LAT lists, Dealer Option Catalog, Factory Race
Equipment, and both the Tiger and Alpine Parts List. The "Workshop
Manual" covers both the Mk I and Mk II models
You should browse this page, and the specific original Workshop Manual:
http://tigersunited.com/resources/wsm/wsm1.asp
/Steve Laifman/
/Editor - /*/TigersUnited.com/* <http://www.tigersunited.com>
On 2/16/11 8:06 AM, Will Seay wrote:
> While you're at it you might want to list the Tiger workshop manual as a
> resource of rebuild information. The workshop manual gives cutaway views of
>the
> servo and a good explanation of how the unit works and how to rebuild it. The
> manual also contains a drawing of the "compression tool" that's required to
>hold
> the piston in place while a retaining clip is removed. The drawing contains
> dimensions so you can make the "tool" from a piece of coat-hanger wire.
>
> Will Seay_____________
> wseay@embarqmail.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|