Duke,
I have also tried the Comp Cams Pro Magnum rockers and, yes, they are too
tall. The only roller rocker I have found that fits under the chrome valve
covers without the 1/4" spacer is Pro-Form 66911. It is flat on top and does
not have the 'hump' that most of them have. I have also used them with the
cast Tiger valve covers without the spacer. There could be others that I don't
know about.
I've attached pictures of both, chrome and cast valve covers, on engines with
these rockers.
Gary
--- On Tue, 2/1/11, Samouce's <wsamouce@kc.rr.com> wrote:
From: Samouce's <wsamouce@kc.rr.com>
Subject: [Tigers] Roller Rockers and Chrome Valve Covers
To: tigers@autox.team.net
Date: Tuesday, February 1, 2011, 9:47 AM
Hello all,
Hunkered down during the blizzard outside. Getting ready to go in the
garage an polish the hard top pad marks out of my paint.
Anyway.... I have AFR 185 aluminum heads with COMP Cams Pro Magnum Rocker Arms
which are chromemoly steel and are a smaller profile that aluminum
roller rockers. I really, really want to use my chrome valve covers with
them. Tom Hall has a 1/4 spacer that I plan on using between the VCs and
the heads.
Question - has anyone out there been successful with chrome valve covers and
roller rockers?
TIA!
Duke
382002037
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/maliburevue@yahoo.com
[demime 1.01d removed an attachment of type image/pjpeg which had a name of
Rockers.jpg]
[demime 1.01d removed an attachment of type image/pjpeg which had a name of
Engine]
[demime 1.01d removed an attachment of type image/pjpeg which had a name of
Engine.jpg]
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|