1967 Tiger MKII
The problem is that when the ignition is switched on, the indicator light on
the dash is very, very dim. I have checked the bulb and the voltage at the
various connectors and all seems to be ok. I even installed new a NOS 6RA
relay, to no avail.
This morning I checked the resistor associated with the 6RA relay. There
is continuity between the terminals, of course, but there is also
continuity between the terminals and the mounting bracket. When I remove the
resistor and bracket from its mounting, I get no continuity between the
terminals and the bracket. Thinking it is internally shorted I checked the
ballast resistor and it also has continuity between the terminals and the
mounting bracket. Is this correct, shouldn't there only be continuity
between the terminals?
Thanks
Richard
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|