In a message dated 1/10/2011 7:19:00 P.M. Eastern Standard Time,
wsamouce@kc.rr.com writes:
Because the
RX7 cable outer sheath is clamped to the caliper, I will not need that on
the hand brake side. I will only know if this will work once I have the
caliper mounted and then start to work it.
Hi Duke,
I'm not sure what you are saying here, but you must attach the outer
sheath to the caliper at one end, as shown in your picture, and the sheath
must
be grounded at the handle bracket or body at the other end . Otherwise you
will be pulling the whole caliper forward when you apply the parking brake.
John Logan
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|