I have such confidence in my air cleaner, and only drive my car to shows chock
full of thieves...did I mention I never lock it and I can't find a nos hood
latch?..
Anyway, I used a bit of valve grinding compound to roughen the threaded area
inside the carb, then rinsed it thoroughly with carbon tetrachloride.
I did the same with the stud, nut and washer.
Next, I turned my attention to the element; a known entry point for cleaner
thieves.
I cleaned and roughened both top and bottom of the element, top and bottom.
Then putting j.b. weld on all threads and all joints, I screwed it down.
I even glued my carb down!
Hah! Got it!
The bastards stole my intake!!
Sent from my Verizon Wireless Phone
----- Reply message -----
From: arado7@sbcglobal.net
Date: Sun, Dec 26, 2010 11:07
Subject: [Tigers] Air cleaner lock
To: <CoolVT@aol.com>
Cc: "tigers@autox.team.net" <tigers@autox.team.net>
In today's climate I use a 9mm. Nobody knows who's packing, and it's legal.
Just watch your car or garage. I do. Gary B9472283
--- On Sun, 12/26/10, CoolVT@aol.com <CoolVT@aol.com> wrote:
From: CoolVT@aol.com <CoolVT@aol.com>
Subject: Re: [Tigers] Air cleaner lock
To: BOBCARNUT@aol.com, barncobob@aol.com, tigers@autox.team.net
Date: Sunday, December 26, 2010, 4:43 PM
Let's face it. No matter what kind of a locking system we invent for the
top, someone is just going to take a pair of pliers and unthread the rod.
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/arado7@sbcglobal.net
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/spook01@comcast.net
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|