its really hard to do those welds well upside down. looks like
you've done good prep work.
On Tue, Dec 7, 2010 at 8:31 AM, wsamouce <wsamouce@kc.rr.com> wrote:
> http://i796.photobucket.com/albums/yy249/samouce/002-11.jpg
>
>
>
> http://i796.photobucket.com/albums/yy249/samouce/001-8.jpg
>
>
>
> Right side is about ready. Screws are to hold pieces in place for welding.
> The bolt is to insure the plate is perfectly placed. They will then be
> removed and screw holes filled. Once everything is tacked in place a hammer
> can be use to shape the pieces for smaller gaps for welding.
>
> I NEED A LIFT.
>
> Start on the left side tonight. It should go much quicker due to my
> experience on the right side.
>
>
>
> Duke
>
> B382002037
> _______________________________________________
> Tigers@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
>http://autox.team.net/mailman/options/tigers/owain.lloyd@gmail.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|
