Dave Wrote:
Remember when repainting,
the area behind the strip is black not
body
color. In fact the whole area
behind the grill aurraond is black. A
mistake
most painters fix. Rumor is
this area was not spray painted but hand
brush painted. Marketing wanted the
chrome cross bars to appear
to be
floating in a black area. The same
marketers had the rockers of
the MK II
painted black under the chrome stide
strips under the stripes
Marketing felt
the effect would make the MK IIs to
look lower.
Dave
Does anyone have a
picture of this area behind grill around that is suppose to
be painted
black? Is gloss black the correct color? Are there any other areas
that are
NOT suppose to be painted body color?
Also does anyone know what size is the
hole before rubber grommet is in place
for the 2 heater core hoses thru the
firewall is suppose to be?
Any other words of wisdom that can be garnered
that should be done before
painting a 1966 MK1A?
Tiger engineering panhard
rods and chassis kits have been welded in with all
'metal' holes repaired by
cutting out and welding in new metal. PPG40 rust
primer competed after
portions of the car and underbody was sand blasted. Doors
and hood was not
sandblasted but hand stripped. Next is the primer coat, this
week, and final
blocking being completed so now is the time for anything I
might be missing
before final primer coat then paint. Front cross member
reinforced welds
also being done.
Thanks in advance.
Joel Martin
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|