Clicking on the diagram on the TU web site will enlarge the diagram.
You can then print it out on an 8 1/2 x 11 sheet. I have done so for
the MkIA version, put it in a plastic carrier and keep it in my car.
It's big enough for these old eyes to read and better than the one in
the Workshop Manual. If you really want to, you could have it
laminated, but only Jim Armstrong is that compulsive.
Tod
B382002384LRXFE
On 9/22/2010 6:28 PM, Jerry & Maureen (Mo) wrote:
> And if it's hard to see, just take it down to Kinko's and get it enlarged so
> you can see it better.
>
> Jerry Christopherson
> 9473187
>
> -----Original Message-----
> From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
> On Behalf Of Tod Brown
> Sent: Tuesday, September 21, 2010 7:52 PM
> To: tigers@autox.team.net; George Re
> Subject: [Tigers] MkI Wiring Diagram
>
> George:
>
> Here's the link to the MkI wiring diagram on Tigers United.
>
> http://www.tigersunited.com/resources/wsm/tt-images/MKIBIGwiring.jpg
>
> Tod
> B382002384LRXFE
> _______________________________________________
> Tigers@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/tigers/jcmc2006@suddenlink.net
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|
