Thanks to the folks who helped with recent alternator question. I
settled on a Denso #210-0107 off of a '86 Toyota 4 Runner. It's pretty
compact, has an internal regulator, an idiot light terminal and the
right pulley. I already made up my brackets and have it mounted and
ready to go. My question now is about the wiring for this unit. Has
anyone used this particular unit? I pretty much understand the wiring
per Theo's previous postings, but this unit has no markings on the
terminals. It has a large terminal (pretty obvious what this is) and
three small ones. I assume one is the idiot light, one is the exciter
(switched 12v) and the third could be a ground? In any case, there are
no markings. Has anyone else used one of these and have a clue on the
terminal arrangement?
Thanks- Randy
--
Randy Smith
INNER QUEST, Inc.
34752 Charles Town Pike
Purcellville, VA 20132
703-478-1078
540-668-6699
540-668-6253 fax
InnerQuestOnline.com <http://www.innerquestonline.com/>
RSSmithIQ@cs.com
Tiger- B382000189
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|