Jim - that was an excellent link, thank you!
-----Original Message-----
From: tigers-bounces@autox.team.net
[mailto:tigers-bounces@autox.team.net] On Behalf Of Jim
Sent: Tuesday, August 31, 2010 12:07 PM
To: rfraser@bluefrog.com; 'Clyde McLaughlin'; tigers@autox.team.net
Subject: Re: [Tigers] k engines
My Tiger had a 6 bolt HiPo in it when I bought it. The only difference
in the head casting was that they had 'pockets' cast in them to hold the
valve springs and they were fitted with screw in studs. The valves were
the same as any other...
Here is a VERY good description of the differences... which aren't
many...
http://www.hipomustang.com/images/hipoeng/
Jim
B382000446
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|