Bob,
The real question, I think, is how do you get the drivers' side valve cover
off? Sadly, the answer is you probably can't.
It's relatively easy to "drop the engine; do it by unbolting the
transmission cross member from the "X" frame and lower the transmission with
a floor jack. Rootes /Shelby were kind enough to give you a 2" hole right
next to the throttle cable so you can reach the back bolt on the valve
cover. From there it's the same old same old.
Tom
On Mon, Aug 16, 2010 at 1:06 PM, Bob Dixon <bobdixon@frii.com> wrote:
> For those running solid lifters in their Tiger, I'm curious if you can
> adjust them without having to lower the engine.
>
> Thanks,
> Bob
> Pikes Peak or Bust 2011
> _______________________________________________
> Tigers@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/tigers/tkparker1941@gmail.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|