The sockets that I used are Motormite #85814. They are license and side
markers sockets for Ford and GM cars 72-94 cars. (Pep Boys, Autozone,etc).
Three things make them great, 1. NO modifications on the Tiger socket. 2.
very small cutting on the new socket with a razorblade to make it fit (it's
some kind of soft plastic)and 3. it has two wires so you can take the ground
wire and attach to the pinch weld nearby.
Mine have been on for 10 years.
Jerry Christopherson
9473187
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of Would U. Believe
Sent: Thursday, August 12, 2010 5:36 PM
To: tigers@autox.team.net
Subject: [Tigers] Turn Signal
My right front turn signal is erratic. I see that the rubber behind the
bulb socket is rotting and the wire connection is a bit dodgy. Is there a
state-of -the art way to replace just the bulb socket in the front marker
light assemblies? Any part numbers or ideas would be great help. Thanks in
advance. M
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/jcmc2006@suddenlink.net
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|