I made the cooling modifications recommended in TE/AE's Rootes Review
several years ago and had some insulating material added to the firewall and
floors when I redid the interior. I also plugged several unused holes in the
firewall.
Engine temp went from 215 operating to 195 operating with a corresponding
drop in cabin temperature.
Fred Baum
In a message dated 8/3/2010 4:35:51 P.M. Eastern Daylight Time,
tkparker1941@gmail.com writes:
Allan,
Through the tunnel, through the floor. Through the shifter hole. throuch
every orifice.
Rick sells plugs; so does British wiring. They're not expensive.
Classic Motorsports used Thermo-Tec's "Cool-it"noise suppression / heat
barrier; it's available from Summit. When I spoke to Tim at last year's
Mitty he swore by it. so, today as luck would have it, I ordered some. If
it's as good as he claimed I expect to be as cool as an old man can be.
Tom
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|