Hi,
For anyone with a Ford parts catalogue(book, fiche,etc), I wonder if the down
pipe flange is comparable on our cars to one from a '65-67 Mustang, Cougar,
Falcon,Cyclone, etc. What diameter are their down pipes for small blocks. And,
failing that information, would it benefit someone to bring their exhaust
manifold
and down pipe to a dealer to match what Ford/Mercury dealers have in stock?
I have the right side manifold off. The dimensions for that flange are:
two inch downpipe hole
the attaching bolt holes are three inches apart, center to
center.
the attaching holes are 9/16 diameter
the actual bolts are 7/16 fine (threaded part)by 1.5" long.
If your dealer can get the part number but not the part, try
www.greensalescompany.com , an obsolete Ford part source. You can enter the
part number to check stock, but you need to call them for price, if they show
the part.
RB
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|