Try Travers Tool Supply...i get most of my machining supplies from them,
have for many years. Various grades offered but all good stuff depending on
your application (home, shop, commercial). 1/2-20 taps starting at around
$5 (they probably have 100's of 1/2-20 tap choices)
http://www.travers.com/
----- Original Message -----
From: "rande" <rande@thecia.net>
To: <tigers@autox.team.net>
Sent: Tuesday, July 13, 2010 10:22 PM
Subject: [Tigers] crossmember taps
>I wondered if someone local (US) could get UNF tap and dies
>
> http://products.tapcousa.com
>
> This outfit sells a single 1/2"-20 UNF set for around 29.00US plus
> shipping.
> The other choice is 1/2"-13 which sounds like course thread.
>
> Someone else is welcome check their site, enter the information and see if
> they
> come up with similar results, or maybe another supplier.
>
> RB
> _______________________________________________
> Tigers@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/tigers/sigmaengr@carolina.rr.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|