tigers
[Top] [All Lists]

Re: [Tigers] Best Clutch Kit 289

To: "'Bob Hokanson'" <tgrrr@peoplepc.com>, "'Tigers'" <tigers@autox.team.net>
Subject: Re: [Tigers] Best Clutch Kit 289
From: "Robin Young" <Robin02@mindspring.com>
Date: Thu, 15 Apr 2010 09:47:38 -0400
Some time before I owned my car, it had the clutch explode.  The passenger
side of the tunnel was badly torn and distorted to the point the false floor
would not fit.  The PO did a poor repair on the tunnel but installed a
Lakewood scatter shield. I have since corrected the damage and take a lot of
comfort in knowing the scatter shield is in place. Robin Young

If you're going to get serious about performance, I highly recommend a 
blowproof (scattershield) bellhousing.
Take a look sometime at how close your right foot is to that thin piece of 
tin that separates you from the soft aluminum bellhousing containing that 13

in diameter cast iron buzz saw disguised as a flywheel. Remember it the next

time you side step the clutch at 6500 rpm.
Or, if you're the type who would rather dote on the proper hose clamp, 
disregard.

Bob H

> If your 289 is going to spin past 6500 RPM, I strongly suggest a racing
> flywheel, as the OEM cast units can shatter.
_______________________________________________
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>