He made a series of incoherrant and venomous posts at the
SAOCA website some 8 months os so ago. He was banned
from the site. I don't know him and certainly never will
I was shocked by the lack of cohesive thought combined with
a massive display of ego. Man is really ill.
Steve
---- Mike Michels <mmichels@socal.rr.com> wrote:
> I got the same treatment from Martel a few years ago. Apparently he felt
> some Sunbeam owner took advantage of him (no idea how or who) and he wants
> nothing to do with anything related to Sunbeams and let me know it in very
> colorful terms. My advice: don't bother with him.
> ----- Original Message -----
> From: "Samouce's" <wsamouce@kc.rr.com>
> To: <robin02@mindspring.com>; "'Baker,Kent'" <kentb@qualcomm.com>;
> <tigers@autox.team.net>
> Sent: Thursday, August 27, 2009 9:56 AM
> Subject: Re: [Tigers] Tiger Sheet metal
>
>
> >I called Bob recently to inquire about a steel LAT hood. He told me is so
> > many words that I did not have enough money for him to make me one.
> >
> > I recently replaced my front valance with a VB unit. It was a good fit.
> >
> > HTH's
> > Duke
> > B382002037
> >
> > -----Original Message-----
> > From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
> > On Behalf Of robin02@mindspring.com
> > Sent: Thursday, August 27, 2009 11:43
> > To: Baker,Kent; tigers@autox.team.net
> > Subject: Re: [Tigers] Tiger Sheet metal
> >
> > KEnt, I spoke to Bob Martel about five years ago when he was moving away
> > from the Sunbeam fabrication efforts. HE was selling some things he still
> > had already made but was not doing any more. It was Bob that told me that
> > Victoria British had a good supplier for body panels from ENgland and the
> > fit was good. LArry Paulick later confirmed this and I bought ten body
> > panels for my car; front and back of each wheel well and the outer rocker
> > panels. THe inner rocker panels were fabricated by my body, paint man.
> > THe
> > fit was good and my car turned out without any evidence of patch panels.
> > At
> > the time, neither Rick not Curt could fill the order. RObin Young
> >
> > ---Original Message-----
> >>From: "Baker, Kent" <kentb@qualcomm.com>
> >>Sent: Aug 26, 2009 1:14 PM
> >>To: "tigers@autox.team.net" <tigers@autox.team.net>
> >>Subject: [Tigers] Tiger Sheet metal
> >>
> >>I am finally getting to the complete restoration of my MK1a, and am
> >>looking
> >>for quality sheet metal replacement parts. Although a Southern California
> >>car, it has rust on the frame exhaust pass through and a few pin holes on
> > the
> >>floorboards immediately above. The shop doing the frame welding contacted
> >>Martell in Ontario, but he is out of the Tiger sheet metal business. I
> > noticed
> >>Classic Sunbeam Auto Parts has the exhaust frame patches listed on its
> > parts
> >>sheet, but have no experience (yet) working with them. Suggestions for
> >>sources? The car is in Reno, Nevada, although I live in San Diego.
> >>
> >>Kent Baker
> > You are subscribed as wsamouce@kc.rr.com
> >
> > Tigers@autox.team.net
> > http://autox.team.net/mailman/listinfo/tigers
> >
> > http://www.team.net/archive
> > _______________________________________________
> > Support Team.Net http://www.team.net/donate.html
> >
> > You are subscribed as mmichels@socal.rr.com
> >
> > Tigers@autox.team.net
> > http://autox.team.net/mailman/listinfo/tigers
> >
> > http://www.team.net/archive
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as sralsten@ca.rr.com
>
> Tigers@autox.team.net
> http://autox.team.net/mailman/listinfo/tigers
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|