Lynn,
Thats, CASTER not CAMBER!
The spec for camber is 30115 positive.
Ross "Commodore Blues" Hulse
Subject: [Tigers] Camber question
Hey all,
First let me say thanks to all the vets out there. Your sacrifice is
appreciated.
Second I am trying to align my tiger and the camber has me puzzled. The
owners manual says 3 degrees 50 minutes positive camber. It describes
positive camber as the top of the tire moving AWAY from the engine.
I cant believe that applies to todays tires and wheels. I am running 16
Panasports and when I went even slightly positive the handling became
EXTREMELY twitchy. I looked up what my 67 mustang should be and it
suggested = to 1 negative camber. I tried that an it seems to handle much
better.
Any ideas/suggestions. Im getting pretty good at changing out shims.
Thank you in advance.
Lynn
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|