Tony
This is where you need to put together a nice little calculator sheet to
determine the right cable gear.
980
16 / 6
907.4
980 is the # of revs the speedo is looking for per mile/ listed on the face
of the speedo.
16 = driven speedo gear
6 = the gear in the transmission
907.4 = tire revs per mile with 2.88 gears
I thought I had a calculator spread sheet for this but can't find it right
now.
Maybe it is on one of the web sites that sells gears.
I believe you would need more teeth on the gear.
Here is some gear information:
Drive gear in trans original # B7C-17285-A 6T
6T E3ZZ-17285-B
7T E3ZZ-17285-A
Cable gears (driven gear);
15T C3OZ-17271-A
16T C1DD-17271-A
17T C2DZ-17271-G C3DZ-17271-B
18T C0DD-17271-B
19T C0DD-17271-C C4DZ-17271-A
20T C1DD-17271-A C2DZ-17271-H
21T C4OZ-17271-A
Ron Fraser
-----Original Message-----
From: Tony Somebody [mailto:achd73@yahoo.com]
Sent: Sunday, March 29, 2009 8:07 PM
To: rfraser@bluefrog.com
Cc: Beamclub
Subject: RE: [Tigers] Re speedo gear- Number of teeth?
Ron or anyone. If 15 tooth was for a stock setup. Does a person running a
331 rearend need more teeth or less. I realize the 15 tooth isnt available
and Im not sure what gear is needed for which rearend or what 5th gear if
applicable.
TtT
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.238 / Virus Database: 270.11.31/2028 - Release Date: 03/28/09
07:16:00
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|