Check here for the gears and speed calcs
Hit the 'Sample' button and you
will get the idea. I think you just need to change the 1st Gear if your have a
close ratio top loader to 2.32, rear ratio and the tire sizes you want. The
program will give you the RPM and SPEED for all the gears. You can try tire
sizes directly or enter you tire diameter. Tire Rack is a good place for the
data. Note that they might use actual rolling diameter instead of calculated
for many of their specs on tires.
http://www.gtsparkplugs.com/GearCalc.html
HTH
Sandy
----- Original Message ----
From: Samouce's <wsamouce@kc.rr.com>
To: tigers@autox.team.net
Sent: Monday, February 23, 2009 7:46:02 PM
Subject:
[Tigers] Tire question....Oh...no.........
Hello all,
I can't stand the
rubbing in the rear of my Tiger any more. I need new 13"
tires but am having
a hell of a time deciding on some.
I have J.A. Pierce staggered wheels.
Currently the fronts have 175 70 R13
and the back 215 60 R13 which are
obviously too big for the wheels.
I do not want the car any lower than it
already is. I am wandering what
would 175 70 13 fronts and 195 60 13 in the
rear would do to the car. I
have a 3.08 rear and the OEM 4 speed.
Any advice
is welcome. The BF Goodrich Radial T/A's on the car are dated
2002.
Duke
B382002037
PS - I did check the archives fist. Still, confused.
_______________________________________________
Support Team.Net
http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|