Listers. I have used a March set of pulleys for a 3 bolt early Mustang on my
Tiger, but had to modify the crank pulley by cutting on a lathe and rewelding
and smoothing to get the correct shorted depth, adjusted the waterpump pulley
slightly with the flange on the pump shaft, I did this when converting to an
altenator, adjusted altenator spacing with the mounts, painted everything
black and it looks stock, used the HIPO 4" pulley from NPD, Clyde
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|