Thanks Sandy, you are quite correct. Paul Reisentz has them on his
website and the price is as good or lower than I was seeing mentioned
for the March pulley in the list archives. I think I had seen that
a couple of months ago when I spoke with Paul and yet I let it slip
from memory. I appreciate the tip!
--Bob
-------- Original Message --------
Subject: Re: [Tigers] 302 crank pulley from March Performance
From: Sandy Ganz <sganz@pacbell.net>
Date: Wed, October 22, 2008 9:08 am
To: bob@hermitagewood.com, tigers@autox.team.net
I was messing around with a March Bottom Pully and a spacer and it
comes pretty close to something that might work, It was a 4 bolt
bottom and is really flat for the 'outtie' style 4 bolt 5.0 Balancer.
Might be the same pulley, but mine was for a late block in early
mustang. I got a harmonic balancer spacer kit (common for ford
aftermarket balancers) that has about a 3/8" spacer (from memory) and
it seems to be something that might work as well for using a more
standard march bottom pulley. Also Dale has them as well as I think
Paul Reisnets (spelling) and price was not that bad when all said and
done they can make it exacly what you need. I'm running a flat fast
aftermarket balancer with Dales set up, but he has them in either flat
face aftermaket offset or late model 5.0 style.
Sandy
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|