I am playing with a 64 Alpine/Tiger door that I bought on E-Pay. I bought it
to get patterns for the glass. I didn't want to tear mine apart for the
patterns. After I removed the glass and regulator I tore the sound deadener
out
it was balled up at the bottom of the door and pulled the door seal off. There
are 2 access plugs at the bottom of the door for the screws that hold the
glass guides. I started looking for drains. On this door there is one drain.
It's in the middle of the door between the retainer that holds the door seal
and the inside of the door. It is 2 inches long and less than 1/8 inch wide.
Probably closer to 1/16. Are all doors like this? I would check your doors for
drainage if you hose wash or drive in the rain it won't take much to plug
this up. HTH
**************New MapQuest Local shows what's happening at your destination.
Dining, Movies, Events, News & more. Try it out
(http://local.mapquest.com/?ncid=emlcntnew00000002)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|