Jeff and Tigers,
As per usual, TigersUnited.com has the original _*Parts List*_
<http://www.tigersunited.com/resources/parts_rs260/FactParts.asp> which
shows, under "Engine (Motor) Section AF" an exploded view of the Motor
Damper. It is identified as a FORD part No. C4OZ-6316316A. The pulley
and dampener are separate listings.
Steve
___
Steve Laifman
Editor - TigersUnited.com
Jeffrey Nichols wrote:
> "If you want one that is not necessarily OEM, then the Professional
> Products balancers are inexpensive and very nicely made. They come with
> the proper (3") overall length, a black finish with 3 sets of timing
> marks engraved and filled with white ink, and 3 and 4 hole pulley
> patterns on the front."
>
>
> I tried to use one of those on my rebuilt 1964 260 and found it hit part of
> the timing cover and would not seat completely. It was listed as fitting all
> Ford small blocks from 260 - 302. Some where along the line, maybe from the
> 260 to the 289, the timing cover was changed. So I bought a new "original
> style" balancer and it fit perfectly. On Ebay there is one listed for $46 #
> 150291380194 .
>
>
>
>
> Jeff
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|