Jim,
Actually the stock wiring (assuming all is in good shape) works just
fine with the tach using the Pertronix I and II points replacement kit
and also the high voltage coil. Using this ignition points replacement
switches the coil current on and off with solid state switches. These
do not "arc" like regular points, so also does away with needing a "dual
point" distributor plate. Vacuum advances work just fine, as well.
Steve
___
Steve Laifman
Editor - TigersUnited.com
Jim & Carolyn Burruss wrote:
> Will the Pertronix electronic ignition drive the stock Tiger tach?
>
> Many thanks.
>
> Jim Burruss
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|