tigers
[Top] [All Lists]

Re: [Tigers] Exhaust question

To: <owain.lloyd@gmail.com>
Subject: Re: [Tigers] Exhaust question
From: "Smit, Theo" <Theo.Smit@dynastream.com>
Date: Wed, 13 Aug 2008 08:35:34 -0600
Putting a bolt-together flange (or even a slip joint) behind the
mufflers makes it pretty easy to detach the back half of the exhaust for
rear axle work. Just make sure that when your car goes to the muffler
shop, that you clearly explain that the exhaust is NOT to go over the
axle tubes, and take your Tiger elsewhere if they insist on doing it the
"usual" way.

Theo

-----Original Message-----
From: tigers-bounces+theo.smit=dynastream.com@autox.team.net
[mailto:tigers-bounces+theo.smit=dynastream.com@autox.team.net] On
Behalf Of Owain Lloyd
Sent: August 13, 2008 8:28 AM
To: michael king; Peter Stanisavljevich
Cc: tigers@autox.team.net
Subject: Re: [Tigers] Exhaust question

thanks everyone - i stand corrected!

i have seen a few going over the axle though.  i imagine under would
give better clearance and less flow restriction though.
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>