Most Circle Tracks have a "BUbble" to check cubic inch displacement. Check with
your local track.
Moonstone
-----Original Message-----
From: Brent Edinger <banana111@msn.com>
To: tigers <tigers@Autox.Team.Net>
Sent: Tue, 29 Jul 2008 6:07 pm
Subject: Re: [Tigers] Tigrt 260 blocks
Maybe you can find someone with one of these and check the displacement.
http://store.summitracing.com/partdetail.asp?autofilter=1&part=MRG%2D3200&N=7
00+4294925139+4294925138+4294857374+115&autoview=sku<http://store.summitracin
g.com/partdetail.asp?autofilter=1&part=MRG%2D3200&N=700+4294925139+4294925138
+4294857374+115&autoview=sku>
Brent B9471023
Message: 12
Date: Tue, 29 Jul 2008 18:51:37 EDT
From: AAAGLASSS@aol.com<mailto:AAAGLASSS@aol.com>
Subject: Re: [Tigers] Tigrt 260 blocks
To: tigers@Autox.Team.Net<mailto:tigers@Autox.Team.Net>
Message-ID:
<c80.311e1e1a.35c0f8f9@aol.com<mailto:c80.311e1e1a.35c0f8f9@aol.com>>
Content-Type: text/plain; charset="us-ascii"
So there is no way to tell these apart unless you pull the starter or intake
or the heads? I didn't want to tear down the engine I just wanted to know if
there was an easy way to tell the engines apart by a glance at the engine.
You are subscribed as drmoonstone@aol.com
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|