I want to write that the heater core is gone but it looks hot enough to not
need it. -- Bill --
Well, there's this one (shamelessly honking Bob's horn)
http://www.britishv8.org/Other/BobHokanson/BobHokanson-B.jpg
In terms of single-four-barrel manifolds, the updated Edelbrock
Performer and Performer RPM (descendants of the F4B) with the air gap
are probably good choices. There are other knockoffs as well, but
they're superficially very similar and unless you had a good look inside
(and probably flow-tested them) it would be tough to pick a standout.
Theo
-----Original Message-----
From: tigers-bounces+theo.smit=dynastream.com@autox.team.net
[mailto:tigers-bounces+theo.smit=dynastream.com@autox.team.net] On
Behalf Of AAAGLASSS@aol.com
Sent: July 29, 2008 3:24 PM
To: tigers@autox.team.net
Subject: [Tigers] F4B manifold.
What is the best intake manifold out there? F4B is the nostalgic choice
because of the lat options, is there another out there that does the job
better??
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|
