i did take note when i removed it and the wedge was indeed towards the
rear but someone reputable told me the wedge should be towards the
front so i thought i'd check with the fountain of all knowledge that
is the tigers list :)
On Wed, Apr 16, 2008 at 12:50 AM, Ross <ross_hulse@sbcglobal.net> wrote:
> Owain,
>
> You took pictures when it came apart, right? :)
>
> They go on with the wedge to the rear.
>
> Just kidding but the orientation is correct.
>
> Ross "Commodore Blues" Hulse
>
> The only reason I know is because my rack is out and I took pictures before
> it went to Tom Hall for repair.
>
> Ross "Commodore Blues" Hulse
>
>
> Subject: [Tigers] orientation of wedges between crossmember and frame
>
>
>
> what is the correct orientation of the wedges between the crossmember
> and the frame?
>
> is the thick end meant to be towards the front or rear?
>
> many thanks.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|