Just to be clear, you *CAN* bore a Tiger 260 to 4.000 inches. I have
one such block in my garage for anyone who wants to see it. This is
not to say that I recommend it, or that it will not self destruct if you
use it.
--Bob
Chris Richards wrote:
> Absolutely you cannot bore a 260 to 289 specification. .060 is not
> reccomended but I have built a dozen or so over the years and not had
> a problem. .030 is great if you have a standard bore block to start
> with. Again...boring to 2/10 of an inch is ludicrous...
>
> *//*
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|