Quicky Reply,
I have seen many lower hoses equipped with a "spring-like" inner
insert. Makes many hoses either upper or lower, as needed, and reduces
auto parts inventory.
You might find a new, or used, spring of the correct OD and length, in
the event that you weren't just "shipped short" by a supplier.
Call or e-mail SS for assistance here.
Steve
___
Steve Laifman
Editor - TigersUnited.com
gharlowe@comcast.net wrote:
> Listers -
>
>
>
> I'm in the process of replacing the lower radiator hose on a Mk1A (fan belt
> rubbed through the old one). I ordered and installed a new one from SS (new
> style being carried by them), which has a pronounced "J" in the contour to
> avoid the fan belt. However, that lower hose is being sucked flat by the
> water pump at higher RPM.
>
>
>
> Any suggestions to prevent the lower hose from collapsing? Has anyone
> replaced this part recently (preferably with a wire-reinforced model)? A
> search on the TU site revealed a NAPA part number 7746 as replacement part,
> but neither the local NAPA nor the NAPA web site recognized that number.
> The CAT shop notes recommend Gates 21034 or 20753, which appear to be active
> P/Ns.
>
>
>
> Thanks, as always...
>
>
>
> Graham Harlowe
>
> B382001466
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|