Listers -
I'm replacing a very leaky oil pressure sensing line with a new one from
Sunbeam Specialties. Of course, at the block end, the fitting for the
existing line has a smaller diameter fitting than the new SS line. I need a
fitting or combination of fittings to mate the new oil pressure line (w/
flare bulb at end of nylon line) to the engine block. The previous set-up
had a male-female fitting threaded into the block with a male-male reducer
threaded into it. Before I head off to the plumbing section of the hardware
store to match threads, is there anything peculiar about this connection?
Is there a standard Ford part number for this fitting?
Thanks and cheers,
Graham Harlowe
B382001466
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|