[Tigers] Vapor Lock

["Jeffrey Nichols" <jxnichols@sbcglobal.net>]

"I need some advice about vapor lock"



I had to same problem with a Edelbrock low-rise manifold and carb.  The
solution was to put a one inch plastic spacer between the carb and manifold.
This insulated the carb from the manifold heat.   If you have a high rise
manifold you will have to measure carefully before you use a spacer.


                                Jeff
_______________________________________________

Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers